Gear shifting and RPM: when to change gear in a manual car for better mileage and a smoother drive

By the TripRank team · 7 November 2026 · 6 min read
In a manual car, the gear you choose decides how hard the engine has to work. The right gear keeps the engine in its comfortable range, which saves fuel and makes the car smoother. The numbers differ between cars, so use the guide below as a starting point and learn what your own engine feels and sounds like.
Know your engine's comfortable range
As a rough guide, many petrol cars drive comfortably between about 1,500 and 3,000 RPM in normal driving, and many diesels between about 1,200 and 2,500. Your manual or the tachometer's green zone gives better figures for your model. If the car shudders or struggles, the RPM is too low for the gear. If it sounds busy and screams, you are using more revs than the road needs.
When to upshift
- Shift up when the engine reaches the top of its comfortable range for steady driving, rather than waiting for the redline.
- In traffic, short-shifting early at moderate revs saves fuel, as long as the engine does not labour.
- Pick up speed first, then shift. Moving to a high gear at low speed makes the engine lug.
When to downshift
- Change down when the engine starts to struggle, for example on a slope or when you need to overtake.
- Downshift before a corner or hill, not in the middle of it.
- Use a lower gear on long descents so the engine helps to brake. See our hill driving guide.
Skipping gears
You can skip a gear, such as going from second to fourth, when you have the speed and the road allows. It can reduce the number of shifts and keep revs low. Do it only when the engine can still pull in the higher gear, or you lose the smoothness you wanted.
Be kind to the clutch
- Do not rest your foot on the clutch pedal while driving.
- Do not hold the car on a slope with the clutch; use the handbrake or hill-hold.
- Press the pedal fully when changing, and release smoothly.
- In long queues, shift to neutral and release the clutch rather than holding it down. See driving in stop-and-go traffic.
What it does for your mileage
Driving in the right gear at moderate RPM generally uses less fuel than hard acceleration in low gears. The effect depends on the car, the load and the road, so measure your own. Our guide to the real fuel cost per km shows how.
See it in TripRank
Smooth shifts mean fewer jerks and hard-acceleration marks in your trip summary, which helps your driving score. Try the same route with early upshifts and compare the fuel cost.
Want to measure it? Track your drives with TripRank and log your fuel.
Frequently asked questions
What RPM should I shift gears at?
Many petrol cars drive comfortably between about 1,500 and 3,000 RPM and many diesels between about 1,200 and 2,500. Check your manual for your model.
Is it okay to skip gears?
Yes, when you have the speed and the engine can still pull in the higher gear. Otherwise the engine struggles and you lose smoothness.
Should I rest my foot on the clutch?
No. Resting your foot on the pedal wears the clutch. Keep your foot off it unless you are changing gear.
Does shifting early save fuel?
Generally, driving in the right gear at moderate RPM uses less fuel than hard acceleration in low gears, but the effect depends on the car, so measure your own.
Car speedometer app: how to pick an accurate GPS speed app (and what to avoid)
Car acceleration app: how to measure 0 to 100 km/h with your phone (safely)